Rychlé informace
Stav: Nový
Voltage: 380V three phase
Jmenovitý výkon: 8,5 kW
Dimension(L*W*H): 3.9m*2.2m*1.65m
Hmotnost: 2000 kg
Certifikace: FDA
Záruka: 2 roky
Poskytuje poprodejní servis: Inženýři jsou k dispozici pro servis strojních zařízení v zahraničí
Color: blue
Maximum cutting speed: 8000mm/min
Torch Height control mode: Automatic High sensitive THC
Plasma power supply: depend on customer's material thickness
Cutting thickness: Depend on plasma source power
Control system: STARFIRE/START/SJTU-CNC etc.
Motors: Stepper motor/servo motor
Software: StarCAM
Feauture: Marking & Cutting
Rozměr LCD displeje: 7,0 palce
Machine Parameter
Modelka | OLT-1530 |
Pracovní plocha X, Y | 1500 x 3000 mm |
Z pracovní plocha | 150 mm |
Balení rozměr | 2200mm*3900mm*1650mm |
Sousední postel | Very thick steel structure |
Výkon stroje | 8,5 kW |
Pracovní napětí | 380V/50HZ three phase |
Reposition precision | 0.02mm |
Processing precision | 0,1 mm |
Maximum cutting speed | 8000 mm / min |
Režim řízení výšky hořáku | Automatické vysoce citlivé THC |
Plazmové napájení | depend on customer's material thickness |
Tloušťka řezu | Depend on plasma source power |
Kontrolní systém | STARFIRE/START/SJTU-CNC etc. |
Motory | Stepper motor/servo motor |
Software | StarCAM |
Hmotnost | 2150 kg |
Tlak vzduchu v plazmě | Max. 0,8 MPa |
Pracovní teplota | -10 ° C-60 ° C. Relativní vlhkost, 0-95%. |
Rozměr LCD displeje | 7,0 palců |
Our Advantages
1. We do this line many years ,have rich experience and professional knowledge ,will let you get the most suitable machine with the right configuration . This ability can let you avoid many mistake and avoid some trouble .Other factory usually lack this experience ,and bring some trouble for the real customer .
2. We have detailed teaching video for customer, like step by step and hand by hand to teach how to use machine and software .etc, so even a freshman will learn machine using faster and easier.
3. Our machines have been professional anti-rust treatment,Are sprayed 2 times anti-rust paint to ensure that all parts of the machine in a fully protected state,And then spray the color.
FAQ
1. Q:How can I get a most suitable machine?
A: Friend, you just can tell us below questions:
1) What metal material you need to cut?
2) What is your material max width,max length, and max thickness.
Then we will know which model suitable for you.
2. Q:How about the payment terms?
A:We support T/T, L/C, Alibaba trade assurance, West Union,etc.
You can send 30% as deposit, and then we will produce your machine, after machine finished, we will take machine pictures
And record video for your confirmation. After you confirm, Pay the balance.
3. Q: How we buy a suitable Air Compressor to fit in CNC plasma cutting machine?
A: This type machine, we will free give customer a Air compressor(Value USD410),and set all the parameter in the Air compressor well, so you no need to spend money to buy it, and can use machine directly when received machine; This is also our Advantages, while most other factory no equip it.